Welcome, Guest. Please login or register.
Apr 17, 14, 05:09PM
Home Help Search Login Register
News:

+  Do It Yourself Home Security Alarm Forum
|-+  Technical Support
| |-+  Ademco Technical Questions
| | |-+  ademco vista 20P 6160 keypad
« previous next »
Pages: [1] Print
Author Topic: ademco vista 20P 6160 keypad  (Read 674 times)
drmrman
Newbie
*

Karma: +0/-0
Posts: 1


« on: Sep 28, 12, 08:25PM »

I started programming my vista 20p with the 6160 alpha keypad. After putting in the installers code I went to #20 to change the installer code to a new master code. I accidently  programmed the code incorrectly and it jumped to *21.  I have no idea what the new master code I programmed in is and I can't get back into programming mode.  Can any one help me get into the programming mode..
Logged
cyremann
Newbie
*

Karma: +0/-0
Posts: 5


« Reply #1 on: Sep 28, 12, 10:37PM »

Unplug the battery and power down the panel. Power it back up and press * and # together while the keypad still shows 'd1'. That will put you into programming mode.
Logged
rvt
Security Professional
*

Karma: +14/-0
Posts: 310


« Reply #2 on: Sep 28, 12, 10:46PM »

Hi and welcome . tou cannot change anything by pressing #20 you must press *20,you can recheck  by , powering the system down AC and BAT then  power up AC first then pressing #+* with in 50 sec. the pad will display 20, then hit #20 it will sequence the present IC ,then hit *20 enter new code
see your install guide to see the difference between installer and master code
Logged
Pages: [1] Print 
« previous next »
Jump to:  


Login with username, password and session length