EXIT DELAY on a DSC Power 1616 Alarm Systems

[biz18434]

Hello, I have a DSC Power 1616 Alarm Systems, DSC RFK5500 Programmable LCD Keypad With Built In Wireless Receiver, and DSC WS4939 Four Button Keychain Remote.  I am trying to change my exit delay to make it as short as possible but it seems I can only make it go to 45 seconds.
*8
Installer’s Code
005   (the programming section)
01     (the partition)
030   (30 seconds for Delay1)
060   (60 seconds for Delay2)
045   (45 seconds for the Exit Delay)
##     (Exit Programming)
When I tried to lower it below 45 seconds it somehow manages to set itself back to like a min or two.
Am I missing something in another section or is 45 seconds the lowest you can set the exit delay.
Thank you,
Jim

[Ken_in_Pittsburgh]

Hi Jim, welcome to the forum.

       If your 1616 is specified as CP-01, then 45 seconds is the minimum exit delay. CP-01 is a set of standards that were developed to address the rapidly increasing problem of false alarms. I'm going to email you a brochure that explains the standards and their rationale.

                                         --Ken